While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications. Excellent Color StabilityImproved Impact Strength. Early Development of Physical and Performance Properties. Produces a Tough, High Gloss, Water Resistant Coating. Eliminates Craters, Crawling and Fish Eyes.Base Resin A-Side Curing Agent B-Side. Appearance: Clear Syrup Clear Syrup. Weight per Gallon: 9.6 Lbs. Mix Ratio: 1 to 1 by Volume. Mass: 25 minutes +/- 5 min. 1/4 Casting Tack Free Time: 2.5 hours +/- 30 min. Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperature. Full Cure 24 to 48 hours for optimum properties. Hardness 7075 Shore D (full cure). Mix material slowly to avoid excess air entrapment, after applying wait several minutes then eliminate bubbles.
With a heat gun or alcohol mist. Substrates must be clean and the area should be dust free. This material is for professional use only, using adequate ventilation and protection from eye and. Any information supplied with this material is given in good faith but should be.Verified by the end user, as is the suitability of the material for their application. Material shall be limited to the replacement of defective material. The item "Crystal Clear Epoxy Resin General Purpose Bar Table Top Coating Wood 4 Gal Kit" is in sale since Wednesday, December 5, 2018. This item is in the category "Business & Industrial\Adhesives, Sealants & Tapes\Caulks, Sealants & Removers\Caulks & Sealants". The seller is "promarinesupplies" and is located in Venice, Florida. This item can be shipped to United States.