Low viscosity, convenient 1:1 mix ratio by volume, room temperature curing system with great clarity and a high gloss finish. This resin cures very hard and has very nice air release.
Excellent chemical and water resistance(s). Perfect for tabletops , fiberglass work , small castings (under 1), electrical potting , jewelry making , concrete - pebble coating , marine applications - boat building , river tables, coating artwork, and creating tumblers. Are you making a river table? This product provides fast cure. Typical pot-life on this item is roughly 30-50 minutes based on mass and temperature.
Thin film set time 3mil. Film is roughly 3 - 5 hours at 78F. Making river tables or large castings?
You can go as deep as you like. Just make sure to work in stages. Please stay under 1 per pour.
Wait 3-4 hours before your second pour. This product cures to a brilliant high gloss finish. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass.Excellent for tumblers, art, wood coating (tabletops) and any application requiring high grade American made resin. Mix this resin 1:1 by volume. If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container.
Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive.
Cold weather slows the cure process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature.
For best results, try pouring epoxy into hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations. Small castings and potting units may take longer to cure than larger items.
For large pours of 1, mix and pour right away! The mix will get too hot if you let stand in the mixing containers too long.
This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use.Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products. All together, it should take about 5-6 days to arrive. The item "EPOXY RESIN 2 Gal kit CRYSTAL CLEAR, Super Gloss Coating and Table Tops" is in sale since Thursday, January 10, 2019. This item is in the category "Business & Industrial\Adhesives, Sealants & Tapes\Caulks, Sealants & Removers\Caulks & Sealants". The seller is "the-epoxy-resin-store" and is located in Pomona, California. This item can be shipped to United States.